300.3 Gets some new exterior
03-20-2005 | 02:04 AM
#1
Thread Starter
CMOC Rookie
Joined: Dec 2004
Posts: 138
300.3 Gets some new exterior
This little Project opted for the C Pillar Side Scoops and Rear Wing!
Paint was completed last Tues.
Steeda Susp. Goodies / Eibach Pro Kit
Exhaust .. ?? here.. which one?? up in the air for now..
Gears .. 4.10's FRPP
some time measuring for Wheels (offset) and Tires on this GT..19's were the choice with 255 F and 285 R..gotta have that right Look!
After the wheels and tires are set up with a little fine tuning/dail in of suspension. The "a Little more Serious" bolt ons will happen! then the Dyno!!!!
Paint was completed last Tues.
Steeda Susp. Goodies / Eibach Pro Kit
Exhaust .. ?? here.. which one?? up in the air for now..
Gears .. 4.10's FRPP
some time measuring for Wheels (offset) and Tires on this GT..19's were the choice with 255 F and 285 R..gotta have that right Look!
After the wheels and tires are set up with a little fine tuning/dail in of suspension. The "a Little more Serious" bolt ons will happen! then the Dyno!!!!
04-11-2005 | 06:20 AM
#3
CMOC Newbie
Joined: Mar 2005
Posts: 11
Nice spoiler from that angle
Originally Posted by techrtm
This little Project opted for the C Pillar Side Scoops and Rear Wing!
Paint was completed last Tues.
Steeda Susp. Goodies / Eibach Pro Kit
Exhaust .. ?? here.. which one?? up in the air for now..
Gears .. 4.10's FRPP
some time measuring for Wheels (offset) and Tires on this GT..19's were the choice with 255 F and 285 R..gotta have that right Look!
After the wheels and tires are set up with a little fine tuning/dail in of suspension. The "a Little more Serious" bolt ons will happen! then the Dyno!!!!
Paint was completed last Tues.
Steeda Susp. Goodies / Eibach Pro Kit
Exhaust .. ?? here.. which one?? up in the air for now..
Gears .. 4.10's FRPP
some time measuring for Wheels (offset) and Tires on this GT..19's were the choice with 255 F and 285 R..gotta have that right Look!
After the wheels and tires are set up with a little fine tuning/dail in of suspension. The "a Little more Serious" bolt ons will happen! then the Dyno!!!!
Why 4.10? It's almost the same as going 3.73 in a 2004 assuming stock tire diameters are maintained.
04-12-2005 | 11:36 PM
#4
Thread Starter
CMOC Rookie
Joined: Dec 2004
Posts: 138
4.10's are great! an overall great gear for the Street!
Run a 26inch ET Street on the 1/4
Run 1 27inch 19 on the street!
Yes Spoiler covers the holes! I believe this is the only one! unless you have the US Delete option!
Run a 26inch ET Street on the 1/4
Run 1 27inch 19 on the street!
Yes Spoiler covers the holes! I believe this is the only one! unless you have the US Delete option!
04-13-2005 | 06:12 AM
#5
CMOC Addict
Joined: Oct 2004
Posts: 711
From: on the bottom!
Originally Posted by techrtm
4.10's are great! an overall great gear for the Street!
Run a 26inch ET Street on the 1/4
Run 1 27inch 19 on the street!
Yes Spoiler covers the holes! I believe this is the only one! unless you have the US Delete option!
Run a 26inch ET Street on the 1/4
Run 1 27inch 19 on the street!
Yes Spoiler covers the holes! I believe this is the only one! unless you have the US Delete option!
What kind of RPM's do you see on the highway? in 4th or fifth @ 120 KmH???
Thread
Thread Starter
Forum
Replies
Last Post
totaljustice
General Mustang Tech & Chat
9
07-28-2014 07:46 PM
KrownLakeshore
Krown Lakeshore - Ford Mustang Accessories
10
03-24-2011 01:06 PM
