Hello All,

I'm new to this message forum so if I make a mistake in process please correct me.

I am retrofitting a hydroboost unit from a 03' Cobra into a Classic 67'. I received the unit without proper labelling on the ports. The unit has 3 ports total: 1 on the body on top at 12 o'clock; 2 on the left side (outboard) that face up and are in a block that is attached to the boost unit. One of the ports on this block is a return to the P/S pump reservoir. My question is "which port is fed the fluid from the P/S pump?" Can anyone help?

Regards,
ofg

 

what year did the unit come from? There are two different types. ONe has three pressure fittings and the other style has 2 pressure fittings and one fitting that just gets a clamp on the rubber hose.

 

As stated, it's from an 03'. I received a reply within 6 hours of my post from another board stateside and I received a great diagram to boot. The boost unit is in and functioning great. Thanks for your interest and good luck with your project.

ofg

 

haha my bad, didn't see the 03 part, glad you got the info ya needed though.