Ported Eaton was installed! Dyno.
02-03-2005 | 01:03 AM
#1
Thread Starter
CMOC Rookie
Joined: Dec 2004
Posts: 138
Ported Eaton was installed! Dyno.
http://www.rtmmotorsports.com/RobsPort1.wmv 
This is a Fast Fast Cobra! actually should be one of the Fastest Eaton's.
2003 Svt Redfire Cobra
Its more of a conquest to look OEM and crank out everylast bit of Rwhp then the sky is the limit.
Some of the MODS:
-DiabloSport Predator
-60lb Injectors
-Harness Adaptors
-Ported Inlet/Eaton Supercharger
-MAFextender
(Custom Dyno tuned Wayne Johnson)
-Denso Iridium Spark Plugs
-2.80 Pulley with Gatorback Belt
-Metco Idler Relocate
-Metco QC Pulley Kit
-PowerPipe
-CAI
-95mm MAF
-Gord's Ford Heat Exchanger
-MagnaFlow Exhaust
-Bassani X-Pipe with Flow Tubes
-RTM Adustable Twin Air Bag IRS -Suspension
-DSS Stage 2 Half-shafts
-TRUE GRIP IRS Quick Launch Kit
-Steeda Full Length Subframes
-E/T Streets
Ran Mid 11's at 120mph .. Now?
Dyno'd at 475.1RWHP Last year! NOW!?
And a Few other Goodies!
Thats Right! shes running the NEW RTM Suspension Setup! and She Stick's! wheel hop! HA
18psi and Cool Charge through the Massive HE
FRICKING LOUD! BASE LINE at 18psi! Now injectors and MAFextender..... Dyno Coming Already in the 5's at the wheels
Tuning by Wayne Johnson.
http://www.rtmmotorsports.com/RobsPort1.wmv
This is a Fast Fast Cobra! actually should be one of the Fastest Eaton's.
2003 Svt Redfire Cobra
Its more of a conquest to look OEM and crank out everylast bit of Rwhp then the sky is the limit.
Some of the MODS:
-DiabloSport Predator
-60lb Injectors
-Harness Adaptors
-Ported Inlet/Eaton Supercharger
-MAFextender
(Custom Dyno tuned Wayne Johnson)
-Denso Iridium Spark Plugs
-2.80 Pulley with Gatorback Belt
-Metco Idler Relocate
-Metco QC Pulley Kit
-PowerPipe
-CAI
-95mm MAF
-Gord's Ford Heat Exchanger
-MagnaFlow Exhaust
-Bassani X-Pipe with Flow Tubes
-RTM Adustable Twin Air Bag IRS -Suspension
-DSS Stage 2 Half-shafts
-TRUE GRIP IRS Quick Launch Kit
-Steeda Full Length Subframes
-E/T Streets
Ran Mid 11's at 120mph .. Now?
Dyno'd at 475.1RWHP Last year! NOW!?
And a Few other Goodies!
Thats Right! shes running the NEW RTM Suspension Setup! and She Stick's! wheel hop! HA
18psi and Cool Charge through the Massive HE
FRICKING LOUD! BASE LINE at 18psi! Now injectors and MAFextender..... Dyno Coming Already in the 5's at the wheels
Tuning by Wayne Johnson.
http://www.rtmmotorsports.com/RobsPort1.wmv
Last edited by techrtm; 02-03-2005 at 01:08 AM.
02-05-2005 | 01:14 AM
#7
CMOC Rookie
Joined: Dec 2004
Posts: 89
sorry it took so long to answer we made 497rwhp@4800rpm, then it flatlined at 497 right to rdline. 572ft/lbs of torque. Injectors and pumps in, goin back to dyno on tues or weds to finish the tune. Hope for 520, but I guess we shall see. 
