Mustang Drivetrain Ford Mustang clutches, transmissions, flywheels, shocks & more. Discuss how to repair these items and which performance parts to add to your Mustang.

Bad vibration

Thread Tools
 
Old 10-13-2007 | 06:42 PM
  #1  
1fastzx's Avatar
Thread Starter
CMOC Newbie
 
Joined: Oct 2007
Posts: 9
From: PEI
Bad vibration

I have an 87 gt with a Tremec transmission and i have a bad vibration. the vibration is there still with the clutch in, in neutral, not moving, and rev it up. does anybody have any ideas? thanks
Old 10-13-2007 | 08:17 PM
  #2  
mustang_mikey's Avatar
CMOC Rookie
 
Joined: Feb 2007
Posts: 42
From: belleville
Does the whole car vibrate? Could be the clutch?
Old 10-13-2007 | 09:37 PM
  #3  
1fastzx's Avatar
Thread Starter
CMOC Newbie
 
Joined: Oct 2007
Posts: 9
From: PEI
yeah the whole car does do you think it would be the clutch or transmission
Old 10-13-2007 | 09:57 PM
  #4  
Ponyryd's Avatar
CMOC Elite
iTrader: (5)
 
Joined: Mar 2006
Posts: 1,531
From: Windsor
Bad harmonic balancer? wrong flywheel? are you sure it's not just a misfire?
Old 10-13-2007 | 10:19 PM
  #5  
1fastzx's Avatar
Thread Starter
CMOC Newbie
 
Joined: Oct 2007
Posts: 9
From: PEI
the whole car shakes and vibrates when you rev it past 2.
Old 10-14-2007 | 10:14 PM
  #6  
Ponyryd's Avatar
CMOC Elite
iTrader: (5)
 
Joined: Mar 2006
Posts: 1,531
From: Windsor
^But is it misfiring? do you know how to tell? how's it run?
Old 10-15-2007 | 12:47 AM
  #7  
Stang Illusions 5.0L's Avatar
HELP SUPPORT CMOC. DONATE!
iTrader: (10)
 
Joined: Jul 2006
Posts: 4,271
From: Trenton
+1 on the "2 piece harmonic balancer" I had the same problem!
If its spun its to hard to tell but she shakes look out!!!!!!!!!!!
Does it make and noise?
Old 10-15-2007 | 04:32 PM
  #8  
1fastzx's Avatar
Thread Starter
CMOC Newbie
 
Joined: Oct 2007
Posts: 9
From: PEI
no noise, just a bad shake, engine runs smooth. somebody told me the problem could be with my clutch, throwout bearing, or the shaft coming out of the transmission.
Old 10-15-2007 | 07:16 PM
  #9  
Ponyryd's Avatar
CMOC Elite
iTrader: (5)
 
Joined: Mar 2006
Posts: 1,531
From: Windsor
Originally Posted by 1fastzx
no noise, just a bad shake, engine runs smooth. somebody told me the problem could be with my clutch, throwout bearing, or the shaft coming out of the transmission.

^Not very likely related to the clutch, t/bearing or input shaft. It's probably a bad balancer or wrong flywheel/unbalanced flywheel.
Old 10-15-2007 | 10:21 PM
  #10  
mise's Avatar
CMOC Veteran
iTrader: (3)
 
Joined: Nov 2004
Posts: 286
From: BRANTFORD
Actually tremecs sometimes have a problem with too much end play on the input shaft if you call there tech line they will send you a kit and tell you how to measure the end play and what the spec is . This sometimes leads to vibration!



All times are GMT -5. The time now is 03:10 AM.