That’s a picture of the engine in my old car. Might give you an idea of what you're looking at later down the list (Especially aesthetic items) More pics to come eventually.



Engine/Performance Stuff.

- Edelbrock performer heads 2.02/1.60 valves w/ Ford Racing 1.6 roller rockers. Springs good to 575 lift. Part no. on the heads is 60399 w/9680 bushing kit needed for the 302 head bolts. 1250obo

- Edelbrock Performer RPM Intake Manifold for a carb’d application (Part no. 71211). Polished. 20 obo (Also comes with ARP bolts for full asking price)
http://www.summitracing.com/parts/EDL-71211/

- Barry Grant Speed Demon 650cfm Carb. Mechanical secondary. Comes with all installation hardware minus throttle cable, a billet aluminum adjustable throttle bracket and all hardware needed to install as well as an electric choke already installed. Looking for 350 obo.
http://www.jegs.com/i/Barry-Grant/13...oductId=743583

- Poly Engine and Trans mounts (with crossmember bushings). Never used. 200 obo

-Custom built stainless straight pipes to pre-axle dumps (for shorties). Flowmax mufflers. Brand new, never used on the car. The car it was on had air ride so they fit nice and tight to the body. This is actually the nicest and most professionally done custom setup I’ve ever seen on a car. No Cats. No Crossover. LOUD! Ideal for a drag car. Completely mandrel bent and well made. 500 obo(almost 1000 to build)


- Champion 3524A starter..for 5.0 obviously. Used only 1200kms w/ bolts if needed. 100 obo

- Polished Ford racing air cleaner w/ filter. Same as the one in the link, but polished, not carbon fibre. 50 obo
http://www.fordracingparts.com/parts...KeyField=10855

Suspension/Exterior/Bling/Misc

- Jet Hot Coated (Polished) Factory Rad brackets. 30 obo

-Jet Hot Coated (Polished) Factory Engine Lift Brackets. 30 obo.

- Chrome Rad Hoses already cut to fit a 302 in a fox body. 75 obo


- Also available, Lincoln Mark VIII Electric fan, with a brand new never used wiring kit from the Hollister Road Company, extremely high end, well built wiring kit for a dual speed fan, with both a 180 and 195 degree temp sensor. Paid 99.95 plus shipping etc. Asking 100 FIRM with the Mark VIII electric fan, Asking 75 FIRM for just the wiring kit. I’ve got two of these and one may be going on my car soon.
more info here: http://www.thehollisterroadcompany.com

- Brand new Ford speedo cable – 50 obo


- 4 Brand new never used KYB Struts and shocks. Looking for 250 obo


- 4 Bolt cross drilled and slotted rotors with pads. Can't remember the brand name but they weren't cheap. Looking for 200 obo


Black door panel blanks. Mint shape. Marks in picture were from where door panel insert goes and was freshly removed. Looking for 150


99% complete interior completely smoothed and w/ custom rear kick panel speaker enclosures. Currently black w/blue flake but could easily be refinished any colour. Looking for 75 bucks for the complete set. Not seperating.



- Brand new black carpet already cut to fit for install. wasn't done perfectly but a nice upgrade from a crusty old carpet. Looking for 50 bucks obo


- Cruise Steering wheel. Looking for 10 bucks


Custom rollbar bolt down w/weld-in plates included or make your own. Looking for 150


Custom interior upgrade package. Racing seats black/blue suede (embroidering can be removed in about 10 minutes by any shop with no holes left behind), with blue suede armrests (console and door), shift boot, dashpad, door cards, black suede rear window deck piece. Looking for only 500 bucks for everything. Over 2500 invested




Parts currently on the chassis but can/will be sold seperately if whole chassis doesn't sell

Chassis pics for part reference....






1.) Front Bumper - $150
2.) Front Fender Pair - $100
3.) Fibreglass Hood (Mid range Brand completely reinforced by professional body man w/fibreglass....an excellent piece) - $250
4.) One piece headlights (available immediately) - $150
5.) Euro Tailights (available immediately) - $150
6.) 8.8 posi Rear End with 3.08 gears and drum brakes - $350
7.) Completely shaved engine bay (will cut out for you and you can have body shop weld in/fit as neccessary) - $500
8.) Lambo Door kit with shaved doors/door pillar bracing - $750
9.) GT Turbine rims with useable tires - $100
10.) New Floor pans - $50
11.) Shaved trunk lid - $200
12.) Rear Bumper - $100
13.) Front k-member and steering rack w/ shaft- $100
14.) Steering column w/key no tilt - $20
15.) Remaining MISC pieces - $.01 and up (INCLUDING LITERALLY BRAND NEW GLASS ALL AROUND)

 

very nice

 

Hello, Is the hood a bolt on?

 

i may know some one looking for parts

 

update: Parts listed in red and marked sold have been sold, everything else still available!

That’s a picture of the engine in my old car. Might give you an idea of what you're looking at later down the list (especially aesthetic items) more pics to come eventually.



engine/performance stuff.

- edelbrock performer heads 2.02/1.60 valves w/ ford racing 1.6 roller rockers. Springs good to 575 lift. Part no. On the heads is 60399 w/9680 bushing kit needed for the 302 head bolts. 1250obo

- edelbrock performer rpm intake manifold for a carb’d application (part no. 71211). Polished. 20 obo (also comes with arp bolts for full asking price)
http://www.summitracing.com/parts/edl-71211/

- barry grant speed demon 650cfm carb. Mechanical secondary. Comes with all installation hardware minus throttle cable, a billet aluminum adjustable throttle bracket and all hardware needed to install as well as an electric choke already installed. Looking for 350 obo.
http://www.jegs.com/i/barry-grant/13...oductid=743583

- poly engine and trans mounts (with crossmember bushings). Never used. 200 obo

-custom built stainless straight pipes to pre-axle dumps (for shorties). Flowmax mufflers. Brand new, never used on the car. The car it was on had air ride so they fit nice and tight to the body. This is actually the nicest and most professionally done custom setup i’ve ever seen on a car. No cats. No crossover. Loud! Ideal for a drag car. Completely mandrel bent and well made. 500 obo(almost 1000 to build)


- champion 3524a starter..for 5.0 obviously. Used only 1200kms w/ bolts if needed. 100 obo

- polished ford racing air cleaner w/ filter. Same as the one in the link, but polished, not carbon fibre. 50 obo
http://www.fordracingparts.com/parts...keyfield=10855

suspension/exterior/bling/misc

- jet hot coated (polished) factory rad brackets. 30 obo

-jet hot coated (polished) factory engine lift brackets. 30 obo.

- chrome rad hoses already cut to fit a 302 in a fox body. 75 obo


- also available, lincoln mark viii electric fan, with a brand new never used wiring kit from the hollister road company, extremely high end, well built wiring kit for a dual speed fan, with both a 180 and 195 degree temp sensor. Paid 99.95 plus shipping etc. Asking 100 firm with the mark viii electric fan, asking 75 firm for just the wiring kit. I’ve got two of these and one may be going on my car soon.
More info here: http://www.thehollisterroadcompany.com

- brand new ford speedo cable – 50 obo


- 4 brand new never used kyb struts and shocks. looking for 250 obo


- 4 bolt cross drilled and slotted rotors with pads. Can't remember the brand name but they weren't cheap. looking for 200 obo


black door panel blanks. Mint shape. Marks in picture were from where door panel insert goes and was freshly removed. looking for 150


99% complete interior completely smoothed and w/ custom rear kick panel speaker enclosures. Currently black w/blue flake but could easily be refinished any colour. looking for 75 bucks for the complete set. Not seperatingsold!!.

- brand new black carpet already cut to fit for install. Wasn't done perfectly but a nice upgrade from a crusty old carpet. looking for 50 bucks obo sold!!

- cruise steering wheel. looking for 10 bucks


custom rollbar bolt down w/weld-in plates included or make your own. looking for 150


custom interior upgrade package. Racing seats black/blue suede (embroidering can be removed in about 10 minutes by any shop with no holes left behind), with blue suede armrests (console and door), shift boot, dashpad, door cards, black suede rear window deck piece. looking for only 500 bucks for everything. Over 2500 invested




parts currently on the chassis but can/will be sold seperately if whole chassis doesn't sell

chassis pics for part reference....






1.) front bumper - $150
2.) front fender pair - $100
3.) fibreglass hood (mid range brand completely reinforced by professional body man w/fibreglass....an excellent piece) - $250
4.) one piece headlights (available immediately) - $150
5.) euro tailights (available immediately) - $150
6.) 8.8 posi rear end with 3.08 gears and drum brakes - $350
7.) completely shaved engine bay (will cut out for you and you can have body shop weld in/fit as neccessary) - $500
8.) lambo door kit with shaved doors/door pillar bracing - $750
9.) gt turbine rims with useable tires - $100
10.) new floor pans - $50
11.) shaved trunk lid - $200
12.) rear bumper - $100
13.) front k-member and steering rack w/ shaft- $100
14.) steering column w/key no tilt - $20
15.) remaining misc pieces - $.01 and up (including literally brand new glass all around)

 

I need that steering wheel.

 

Hi there,

I am interested in several parts.

Such as
1 - Rad Hoses
2 - Rotors
3 - Steering Rack

How can I get a hold of you???

Peter

 

Mods, please delete this thread, I have too many updates to bump this one up, so I'm going to make a new one. Thanks/sorry for the hassle.

 

Hey Im interested in your brakes, suspension and perhaps interior. Can you email me the pics cuz I couldn't see them through the link. gosai_hemal@hotmail.com. Thanks

 

Hey, where are you located, I cant view the pics, it says they are removed. I'd like to check out the interior and some other parts. I can probably come by during the weekend or sometime next week. Or just send me pics so I can see if the colour scheme will match my car, my email is in the last thread. Thanks