Bought a fully done Mustang a few months back but can't stand driving it, so time to part it out and put it back to stock. Everything is the best of the best and has low mileage. Big Stuff 3, Cobra Brake Kit, Vortech blower, Complete QA1 coilover kit....you name it, I've got it. Want to get rid of all this to fund a new project
NOTE: All prices listed are OBO but don't try to lowball me, I've got receipts for everything there and know what it's worth. Also, if interested I can install the parts on your car for you, I've been working on these cars for over a decade and can guarantee my work. Please call me at 905 928 4053 if interested in parts/install, keep the PM's to a minimum I can never keep track of them

Engine Performance

- Big Stuff 3 Fuel injection system. Part no 004-001. Complete with processor, engine harness and injector harness. Came off a running, driving 93 GT. Don’t need the system, going back to the stock setup. Comes complete with an MSD 8598 Ready to run distributor http://www.summitracing.com/parts/MSD-8598/ and MSD 8640 Crank Trigger Kit http://www.summitracing.com/parts/MSD-8640/ Looking for $1800 (over a $2500 value).


- Vortech Supercharger 4FA218-040SQ 1986-1993 Mustang 5.0L V-2 SQ Si-Trim. Comes with supercharger, all bracketry and hardware, cone filter, intake pipe (supercharger side), Intake pipe (engine side) all couplers, etc etc. Missing FMU (custom tune recommended anyways). 7“ Crank pulley/~3.5 blower pulley (8 rib). Looking for $1800. All installation manuals/owners manuals included, but install is also available. PM to discuss.
http://www.vortechsuperchargers.com/...on.php?pvk=572


- Fully rebuilt (Beatty and Woods) 306 short block, polished rods, forged pistons (TRW 255-58), studded crank. 3500 kms on it. $1500


- Edelbrock Performer (Part no 60279) with 2.02/1.60 valves, they’ve been O-ringed for boost, and come with ARP heads studs and adjustable 1.6 stud mounted roller rockers.
[

- Moroso 7 qt. Oil Pan and Pick up. $250


- Melling M68 HVHigh Volume Oil pump and hardened oil pump driveshaft. $40

- BBK SSI Intake Manifold. Comes with a 70mm throttle body and BBK high flow fuel rail and Regulator. (Part no. 5002) Newer casting, and no fuel leak issues. $500
http://www.bbkperformance.com/produc...-manifold.html


- Lakewood SFI spec 6.1 Bellhousing Part no 96130080 (Manu. Date 12/15/06) and heavy duty clutch fork. $350


- Ford Racing Aluminum Driveshaft. $200

- BBK 15055 Clutch Cable kit (Quadrant and firewall adjuster). Almost new. $125

- 42 lb/hr injectors Ford Green tops. Looking for $300.
http://www.americanmuscle.com/mustan...injectors.html


- B&M Hammer Shifter for 87-93 Mustang with AOD Part no 81002. Looking for $100. NOTE: It is missing the 1 2 3 4 R N D cover, so you would need to locate one, or this could be put in a drag only car without issue.
http://www.summitracing.com/parts/BMM-81002/


- B&M Pro Ripper Shifter for a T5 Part no. 45070. $150
http://www.summitracing.com/parts/BMM-45070/
- Hurst Shift **** (shown in pic with shifter) $25


- Crane Energizer 1.7 Roller Rockers from a 93 Cobra. Pedestal Mount. (Part number on the rockers is F3ZE-6529-AB or M6564-A50) w/ all shims, fulcrums, bolts etc. $150. http://www.thefordsource.com/store/p...er_rockers.pdf


- RAM 98794HD Powergrip Clutch. Very little use, under 2500kms. $250
http://www.summitracing.com/parts/RAM-98794HD/
- RAM 1525 Billet Steel Flywheel. $200
http://www.summitracing.com/parts/RAM-1525/


- GT-40 Upper/Lower intake in mint shape. Off a 1996 Ford Explorer. $250

- 65 MM throttle body off a 1996 Explorer (F3ZE-BA part number, 03-27-96 date code on it). $150.

- E303 Cam, great shape low miles. $150.

- ACCEL 4056 8mm Yellow spark plug wire set. $10

- Double Roller Timing Chain w/ 9 Way Adjustable Keyway. $50


- BBK LT headers (Part no. BBK-1516). $200
http://www.summitracing.com/parts/BBK-1516/
- BBK Catted H-pipe for LT’s (Part no. BBK-1509). $250
http://www.summitracing.com/parts/BBK-1509/
OR TAKE THE WHOLE SETUP FOR $400

- BBK Shorty Headers Part no 129-1515. No bolts included. $100
http://www.jegs.com/i/BBK-Performanc...oductId=747933

- Fluidyne FHP20-93 Radiator for a Manual transmission mustang 5.0. Comes with a twin electric fan setup custom fit to the rad and the associated wiring (will not separate without a buyer for just the fans first) Cooled a 500 rwhp car with AC without issue. $350
http://www.lastcallracing.com/flu-fhp20-93mu.html


- 3G Beavco Alternator, super low miles. Previous owner said it was a 160 amp, which makes sense because he had a pretty nice sound system in the car and Beavco was known for making quality high amp alternators. 150


-MSD 6240 6AL ignition box. $150
-MSD 8223 Blaster 3 Ignition Coil. $40
- MSD 8830 Noise Filter. $25
- MSD Super Conductor 8.5mm Spark Plug Wires - Red (79-93 5.0L). $25
OR all of the above for $200


- Ford Racing Valve Covers. Mint Shape. $150


- Aluminum Valve covers. Think they’re off an 86 mustang but not sure. Similar to factory but cleared the 1.6 adjustable rockers that were on the motor. $50


- 18” Fan w/ 2” spacer and bolts. $50


- March Crank and WP Underdrive pulleys. Powercoated Blue. $50

- Mustang Licence Plate Brackets. 10 bucks a set.
[/

 

what do you want for the 306 intake to pan?

 

Hey, I'm interested in the e303 cam and the aluminum driveshaft. WIll these work on my 94 5.0 ho? And what's the make of the shaft? Frpp?

 

whats the $$$ on the heads

 

What's your absolute best price on the fans and rad combo?

Thanks,

 

holy hell the amount of parts

 

also interested in heads

 

oil pan still for sale?
thanks

 

I think this ad is getting long in the tooth

 

i'll take the headers, h-pipe and drive shaft if available