1970 Mustang MACH1 For Sale
10-15-2005 | 05:06 PM
#1
1970 Mustang MACH1 For Sale
With a heavey heart I list my beautiful 1970 Mustang Mach1 FOR SALE
1970 Mustang Mach1, 351 Cleveland 4V, fresh engine rebuild Spring 2004 with: domed forged TRW pistons (10.4 to 1), 4V Open Chamber Heads redone w/stainless steel valves, hardened seats, roller rockers. Fresh Cam lifters & springs at same time. balanced/blueprinted, 540 lift Cam Research Hyd Cam, ARP Conn rod & Main bearing studs, windage tray, aluminum water pump, Crane fireball ignition, Edelbrock Torker Intake, Holley 650 Dbl Pmpr Carb, nothing but the best used in this engine build.
Car is in EXCELLENT condition, and has been garage kept since it's infancy. No rust that I know of, car looks great, shows well, and some of you have seen it on the track at Mosport, for it's once a year "carbon clean out" !!! lol
4spd Toploader Tranny, 9" rear with Posi & 3.25 gears. KYB Gas-a-just shocks on all four's, front sway bar upgraded to 1-1/8", Polygraphite bushings throughout, 1 peice export brace & Monte Carlo bar installed. has BFG T/A' 245/60-14" mounted on original perfect condition 14 x 7" Magnum 500 rims.
Was repainted once in 1994 and was taken to bare steel. This was not a full restoration beacause the car did not need it apparently. Original interior & still looks great.
This is a reliable (driven to Woodward Ave. Dream Cruise this year & on many many trips) and quick head turner you will LOVE to drive & enjoy.
Have more pictures if wanted.... car is located outside Hamilton in Ancaster.
$30,000 cdn
Contact Steve at steve@muggziperformance.com
or call home at 905-304-9818
Thank you for looking
Steve Mason
1970 Mustang Mach1, 351 Cleveland 4V, fresh engine rebuild Spring 2004 with: domed forged TRW pistons (10.4 to 1), 4V Open Chamber Heads redone w/stainless steel valves, hardened seats, roller rockers. Fresh Cam lifters & springs at same time. balanced/blueprinted, 540 lift Cam Research Hyd Cam, ARP Conn rod & Main bearing studs, windage tray, aluminum water pump, Crane fireball ignition, Edelbrock Torker Intake, Holley 650 Dbl Pmpr Carb, nothing but the best used in this engine build.
Car is in EXCELLENT condition, and has been garage kept since it's infancy. No rust that I know of, car looks great, shows well, and some of you have seen it on the track at Mosport, for it's once a year "carbon clean out" !!! lol
4spd Toploader Tranny, 9" rear with Posi & 3.25 gears. KYB Gas-a-just shocks on all four's, front sway bar upgraded to 1-1/8", Polygraphite bushings throughout, 1 peice export brace & Monte Carlo bar installed. has BFG T/A' 245/60-14" mounted on original perfect condition 14 x 7" Magnum 500 rims.
Was repainted once in 1994 and was taken to bare steel. This was not a full restoration beacause the car did not need it apparently. Original interior & still looks great.
This is a reliable (driven to Woodward Ave. Dream Cruise this year & on many many trips) and quick head turner you will LOVE to drive & enjoy.
Have more pictures if wanted.... car is located outside Hamilton in Ancaster.
$30,000 cdn
Contact Steve at steve@muggziperformance.com
or call home at 905-304-9818
Thank you for looking
Steve Mason
Last edited by mach1steve; 10-16-2005 at 12:12 PM. Reason: s/p
10-15-2005 | 10:28 PM
#2
CMOC Addict
Joined: Apr 2005
Posts: 731
From: Trenton/Cobourg/ Ontario
WOW.....Why are you selling such a beautiful car? How much are you asking? :cry2:
10-15-2005 | 11:47 PM
#3
CMOC Addict
Joined: Oct 2004
Posts: 838
From: Scarborough
I second that. How much are you asking?
10-16-2005 | 09:15 AM
#4
CMOC Rookie
Joined: Sep 2005
Posts: 73
From: Toronto, ON
I "third" that! 
(When you state a price, you immediately define your potential market. On the assumption that you're asking more than $4,500. 
)
(When you state a price, you immediately define your potential market. On the assumption that you're asking more than $4,500. )
10-16-2005 | 09:44 AM
#5
Forgot the price..... DOH ! (big DOH)
HI
I'm asking $30,000 cdn and I will ceritfy it, no e-test required obviously.
These cars sell for $25,000 to $40,000 so I have priced this car to move.
There is a 69 Mach1 in the Auto-trader for $39,000 right now that is not as nice nor as well optioned, and it is an automatic tranny, the 4 spd cars are selling for more than automatic cars (fun factor I guess)
Any questions, e-mail me at home smason36@cogeco.ca
Mach1steve
I'm asking $30,000 cdn and I will ceritfy it, no e-test required obviously.
These cars sell for $25,000 to $40,000 so I have priced this car to move.
There is a 69 Mach1 in the Auto-trader for $39,000 right now that is not as nice nor as well optioned, and it is an automatic tranny, the 4 spd cars are selling for more than automatic cars (fun factor I guess)
Any questions, e-mail me at home smason36@cogeco.ca
Mach1steve
10-16-2005 | 10:49 AM
#6
CMOC Addict
Joined: Apr 2005
Posts: 731
From: Trenton/Cobourg/ Ontario
What kind of miles are on engine, car etc. Any particular reason for parting with this classic?
I have an inquiring mind........
I have an inquiring mind........
10-16-2005 | 12:47 PM
#8
CMOC Addict
Joined: Apr 2005
Posts: 731
From: Trenton/Cobourg/ Ontario
Originally Posted by mach1steve
see a PM I sent you
Information recieved.....With Thanks....
10-16-2005 | 01:20 PM
#9
I am the post KING
Joined: Feb 2005
Posts: 15,244
From: Calgary
Trade you for an 05Gt :laughhard
Thread
Thread Starter
Forum
Replies
Last Post
